How To Assign Ip Address In Windows 7

How To Assign Ip Address In Windows 7-62
Sometimes in order to gain connectivity in certain networks where a DHCP server is not running, the configuration of a static IP address is required.

Sometimes in order to gain connectivity in certain networks where a DHCP server is not running, the configuration of a static IP address is required.

Tags: Do My Spanish Homework For MeTaxation Dissertation TopicsInventions That Solve Everyday ProblemsWriting Assignments For Esl StudentsWrite Business Scholarship EssayThesis Electronic BankingGood Essay Introduction ExamplesSelf Introduction In EssayDescriptive Essay Club

This can be done in one of two ways; the first way to access it is via the control panel.

Select the Windows 7 Orb on the bottom left-hand corner and select the control panel option as shown below: There are several views which are available for the control panel; by default the category view is used.

These options are shown in their correct locations in the following figure: Once these options have been entered on the screen simply press Ok on both property screens and the configuration of a static IP is complete.

The knowledge of static IP configuration is vital in modern organizational environments as many do not completely utilize automatic IP assignment; it is also vital knowledge when trying to troubleshoot IPv4.

For the purpose of this article the IP address 192.168.1.100 is used with a subnet mask of 255.255.255.0 and a default gateway of 192.168.1.1.

The DNS server which will be configured is 4.2.2.2.

The second way to gain access to the Network and Sharing Center is to utilize the network icon which is displayed in the system tray when a network interface has been enabled.

When this icon is right-clicked the option to open the Network and Sharing Center is given as shown below: Once the Network and Sharing Center is open there is an option which allows the change of adapter settings which is shown in the upper left hand corner of the window.

Right now, the IP addresses for your PCs and other devices are probably assigned automatically by your router using a procotol known as Dynamic Host Configuration Protocol (DHCP).

It’s a handy way for devices to connect to your network more easily, because you don’t have to configure IP addressing for each new device yourself.

SHOW COMMENTS

Comments How To Assign Ip Address In Windows 7

The Latest from www.gatsport3.ru ©